Search found 25 matches

by tom995
Wed Feb 06, 2013 7:30 pm
Forum: DBTC Forum
Topic: 1490 dipstick marks
Replies: 10
Views: 6945

i have to run 995 above full or it wont tip two ram sileage trailers to top
by tom995
Wed Feb 06, 2013 7:22 pm
Forum: DBTC Forum
Topic: David Brown 995/6 v Ford 5000
Replies: 8
Views: 7835

i often use a ford 5610 (same arond 75 hp as 5000) as wel as db 995, very evenly matched when it comes to power and grip, ford lacks synchro gears but has dual power clutchless splitter
by tom995
Sat Dec 08, 2012 11:34 pm
Forum: DBTC Forum
Topic: How many left?
Replies: 69
Views: 36623

RE: Re: RE: Re: RE: how many

two 995s, one running, other hopefully soon will be, i make that 339
by tom995
Wed Nov 21, 2012 6:05 pm
Forum: DBTC Forum
Topic: engine oil pressure
Replies: 5
Views: 3942

put a gauge on after a 7 mile drive, tickover was about 38-40, flat out about 55 psi
by tom995
Mon Nov 12, 2012 9:28 am
Forum: DBTC Forum
Topic: 995 3pl wont lift while the tractor is hot ????
Replies: 3
Views: 1814

pump worn out maybe? mine slows down and needs revs to lift when warmed up
by tom995
Thu Nov 08, 2012 2:21 pm
Forum: DBTC Forum
Topic: engine oil pressure
Replies: 5
Views: 3942

thank you, think i will fit a gauge then i can keep an eye oon it :)
by tom995
Tue Nov 06, 2012 9:34 pm
Forum: DBTC Forum
Topic: UJ in front axles of 1594
Replies: 6
Views: 3117

RE: UJ in front axles of 1594

all the newholland tractors i work with dont have grease nipples in the front axle ujs
by tom995
Tue Nov 06, 2012 9:32 pm
Forum: DBTC Forum
Topic: engine oil pressure
Replies: 5
Views: 3942

engine oil pressure

what should the engine oil pressure be in a 995 engine? and what pressure does the switch work at? the light goes out but was just wondering if it would be worth checking it with a gauge? thanks in advance Tom
by tom995
Wed Oct 17, 2012 2:52 pm
Forum: DBTC Forum
Topic: 1594 Values
Replies: 33
Views: 16238

db engine might smoke a lot and nt start as well but once its goin it wipe floor with them lazy perkins and deere motors
by tom995
Thu Aug 23, 2012 9:03 pm
Forum: DBTC Forum
Topic: DB 990 1972 oil pressure
Replies: 8
Views: 6330

RE: DB 990 1972 oil pressure

my 995 takes few seconds to go out, even new tractors take a second or two, i never rev her for at least a minute after start up, always believed never rev a cold motor.
by tom995
Sun Aug 19, 2012 7:05 pm
Forum: DBTC Forum
Topic: Nice to know where t`other halfs gone to!!!
Replies: 7
Views: 3447

i found one of those brass bits in my 995, was told it be ok as i only found one, is this right?| thanks Tom
by tom995
Sat Aug 18, 2012 8:40 am
Forum: DBTC Forum
Topic: 995
Replies: 8
Views: 3889

RE: 995

995 clutch cheaper to replace than 996 and you dont gain anything having the hand clutch so no point modifying.
by tom995
Sat Aug 18, 2012 8:28 am
Forum: DBTC Forum
Topic: Wheel Swapping Options
Replies: 1
Views: 1660

RE: Wheel Swapping Options

Ford wheels wont fit because they have bigger holes for the studs, the centres may swap, you will have to measure but there should be no problem swapping the tyres ont the rims, as long as both sets are 36 inch centres.
by tom995
Thu Aug 02, 2012 9:32 pm
Forum: DBTC Forum
Topic: 990 selectamatic crank thrusts
Replies: 4
Views: 2563

torque setting for 995 mains is 160 lbs, guess 990 is same as they have same block
by tom995
Sun Jun 24, 2012 11:02 pm
Forum: DBTC Forum
Topic: traction
Replies: 29
Views: 16776

Masseys never can grip to save their life, carting grass other day up fairly steep hill, ford 5610 and db 995 8 ton trailers no bother, mf 390 scratting like hell, even spun out once